Filter
Top Products
FUNCTIONS AND OPERATIONS
Function & Mode Action
Scan Press the button until SCAN appears on the screen.
Monitor will rotate through all functions –
Time, Calorie, Speed, Odometer, and Distance.
Each display will hold for 4 seconds.
Speed Press the button until SPEED appears on screen.
Monitor will display the current speed in Mile per Hour.
Distance Press the button until DIST appears on screen.
Monitor will display the distance has traveled.
Time Press the button until TIME appears on screen.
Monitor will display the accumulation of riding time.
Calorie Press the button until CAL appears on screen.
Monitor will display the calorie consumptions.
Reset Press and hold the button for more than 2 seconds to
reset all data to 0.
HOW TO INSTALL BATTERY
1. Pull off the battery cover and place two SIZE-AA batteries into the battery
compartment on the back of the computer (See Diagram below).
2. Make sure batteries are correctly positioned and springs are properly
contacted with batteries.
3. Put the cover back. The Battery life is approx. 1 year under normal usage.
4. If the display is blurred or only partial appeared, remove the batteries and
wait for 15 seconds then re-install the batteries.
5. Remove the batteries will erase all computer memories.
12