Filter
Top Products
STEP 2 (See Diagram 2)
A.) Attach the back of the Main Seat Support (#10) to the Cross Brace (#3).
Secure it with one 4 3/8” Bracket (#9), two M10 x 2 ½” Carriage Bolts (#36),
two ∅ ¾” Washers (#37), and two M10 Aircraft Nuts (#38).
B.) Slide the Sliding Block (#11) onto the Main Seat Support (#10). Secure it with
a Lock Knob (#8).
C.) Attach the Front Stabilizer (#12) to the Main Seat Support (#10). Secure it
with two M10 x 2 ½” Carriage Bolts (#36), ∅ ¾” Washers (#37), and M10
Aircraft Nuts (#38).
D.) Insert the Leg Developer Holder (#13) into the Front Stabilizer (#12). Secure
it with a Lock Knob (#8). Attach the Leg Developer (#17) to the bracket on
the Leg Developer Holder (#13). Secure it with an Axle (#16), two ∅ ¾”
Washers (#37), and two M10 x 5/8” Allen Bolts (#39). Attach a Spring Clip
(#32) onto the weight post on the Leg Developer. NOTE: When using the
decline position to do Ab exercises, place at least 30 lbs. of weights on the
post to hold down the leg developer.
DIAGRAM 2
5