Filter
Top Products
STEP 2 (See Diagram 2)
A.) Attach the Rear Vertical Beam (#23) onto the Cross Brace (#20). Attach the Weight Glide
Post (#22) to the Rear Vertical Beam and Cross Brace. Align the holes and secure them
with two M10 x 2 ¾” Carriage Bolts (#93), ∅ ¾” Washers (#82), and M10 Aircraft Nuts
(#99).
B.) Slide the Sliding Weight Post (#34) onto the Weight Glide Post (#22).
C.) Place the Upper Frame (#21) onto the Rear Vertical Beam (#23), Weight Glide Post (#22),
and Front Top Beam (#32).
D.) Secure the Upper Frame to the Weight Glide Post (#22) with two M10 x 2 3/8” Allen Bolts
(#88), four ∅ ¾” Washers (#82), and two M10 Aircraft Nuts (#99).
E.) Secure the Upper Frame to the Rear Vertical Beam (#23) with two M10 x 2 3/8” Carriage
Bolts (#91), ∅ ¾” Washers (#82), and M10 Aircraft Nuts (#99).
F.) Secure the Upper Frame to the Front Top Beam (#32) with two M10 x 2 ¾” Carriage Bolts
(#93), one 4 ¾” x 2” Bracket (#47), two ∅ ¾” Washers (#82), and two M10 Aircraft Nuts
(#99).
G.) Push two Olympic Sleeves (#59) onto the weight posts on the Sliding Weight Post (#34).
Attach a Spring Clip (#76) to each Sleeve.
H.) Securely tighten all nuts and bolts previously installed.
10