Filter
Top Products
STEP 2 (See Diagram 2)
A.) Attach the Leg Developer Holder (#5) to the Front Stabilizer (#4). Secure it with three
M10 x 5/8” Allen Bolts (#47) and ∅ ¾” Washers (#52).
B.) Attach the Main Seat Support (#3) to the Leg Developer Holder (#5). Secure it with
three M10 x 2 ¾” Carriage Bolts (#45), M10 Aircraft Nuts (#51) and ∅ ¾” Washers
(#52).
C.) Attach the Main Seat Support (#3) to the Cross Brace (#2). Secure it with two M10 x 2
¾” Carriage Bolts (#45), one 4 ¾” x 2” Bracket (#21), two ∅ ¾” Washers (#52), and two
M10 Aircraft Nuts (#51).
DIAGRAM 2
5