Filter
Top Products
STEP 2 (See Diagram 2)
A.) Attach the Rear Vertical Beam (#38) onto the Cross Brace (#36). Attach the Weight Glide
Post (#34) to the Rear Vertical Beam and Cross Brace. Attach the Foot Plate (#115) to the
Cross Brace. Align the holes and secure them with two M10 x 2 ¾” Carriage Bolts (#103),
∅ ¾” Washers (#89), and M10 Aircraft Nuts (#106).
B.) Slide the Sliding Weight Post (#45) onto the Weight Glide Post (#34).
C.) Place the Upper Frame (#37) onto the Rear Vertical Beam (#38), Weight Glide Post (#34),
and Front Top Beam (#43).
D.) Secure the Upper Frame to the Weight Glide Post (#34) with two M10 x 2 3/8” Allen Bolts
(#95), four ∅ ¾” Washers (#89), and two M10 Aircraft Nuts (#106).
E.) Secure the Upper Frame to the Rear Vertical Beam (#38) with two M10 x 2 3/8” Carriage
Bolts (#100), ∅ ¾” Washers (#89), and M10 Aircraft Nuts (#106).
F.) Secure the Upper Frame to the Front Top Beam (#43) with two M10 x 2 ¾” Carriage Bolts
(#103), one 4 ¾” x 2” Bracket (#57), two ∅ ¾” Washers (#89), and two M10 Aircraft Nuts
(#106).
G.) Slide two Olympic Sleeves (#62) onto the posts on the Sliding Weight Post (#45). Attach a
Spring Clip (#83) to each Sleeve.
H.) Secure the Foot Plate (#115) to the Rear Vertical Beam (#38) with one M10 x 2 ½”
Carriage Bolt (#102), Ø ¾” Washer (#89), and M10 Aircraft Nut (#106).
I.) Securely tighten all nuts and bolts previously installed.
10