Filter
Top Products
STEP 3 (See Diagram 3)
A.) Attach the side-holes on the end of the Backrest Supports (#11) to the pivot on the Main
Seat Support (#4). Secure them together with one M12 x 7 ¼” Hex Bolt (#43), two ∅ 1”
Washers (#40) and one M12 Aircraft Nut (#51).
B.) Attach the Backrest Board (#13) to the Backrest Supports. Secure it with four M8 x 1 ½”
Allen Bolts (#47) and Ø 5/8” Washers (#38). Place the other end of Backrest Board rest
against the Backrest Adjustment Bar.
C.) Attach the two Seat Brackets (#6) onto the Main Seat Support. Secure each Seat Bracket
with one M10 x 2 ½” Allen Bolts (#44), two Ø ¾” Washers (#39), and one M10 Aircraft
Nut (#50).
D.) Place the Seat Pad (#14) onto the Seat Brackets. Secure it with four M8 x 1 ½” Allen
Bolts (#47) and Ø 5/8” Washers (#38).
DIAGRAM 3