Filter
Top Products
STEP 4 (SEE DIAGRAM 4)
A.) Attach the Backrest Supports (#16) onto both ends of the Pivot on the Main Seat
Support (#52). Place the other end rest against the Backrest Adjustment Bar (#10).
B.) Place the Backrest Board (#18) onto the Backrest Supports. Secure it with four M6 x 1
3/8” Hex Bolts (#50) and ∅ ½” Washers (#51).
C.) Place the Seat (#19) onto the bracket on the Main Seat Support (#52). Align the holes
and secure the Seat with four M6 x 1 3/8” Hex Bolts (#50) and ∅ ½” Washers (#51).
D.) Attach the Arm Curl Pad (#23) to the Arm Curl Stand (#22). Secure it with two M8 x ¾”
Hex Bolts (#20) and Ø 5/8” Washers (#21).
E.) Insert the Arm Curl Stand into the opening on the top of the Front Stabilizer (#42). Use
a Lock Knob (#47) to secure it at desired height.
DIAGRAM 4
8