Filter
Top Products
STEP 3 (See Diagram 3)
A.) Do not tighten Nuts and Bolts until instructed to do so.
B.) Align the bracket on the Backrest Adjustment Support (#20) in between the two
Backrest Supports (#25). Secure it with four M8 x 1 5/8” Allen Bolts (#52), eight Ø 5/8”
Washers (#55), and four M8 Aircraft Nuts (#57).
C.) Insert the Backrest Adjustment Support into the opening on the Main Seat Support
(#9). Press or step down on the Backrest Adjustment Lever (#26) to allow the Support
to go through.
D.) Attach the bottom side-holes on the two Backrest Supports to the pivot on the Main
Seat Support. Secure it with one M10 x 6 ½” Allen Bolt (#47), two Ø ¾” Washers
(#54), and one M10 Aircraft Nut (#56).
E.) Attach the Backrest Board (#17) to the Backrest Supports. Secure it with four M8 x 1
5/8” Allen Bolts (#52) and four Ø 5/8” Washers (#55).
F.) Place the Seat Pad (#18) onto the Seat Bracket (#12). Secure it with four M8 x 1 5/8”
Allen Bolts (#52) and four Ø 5/8” Washers (#55).
G.) Securely tighten all Nuts and Bolts installed.
DIAGRAM 3
7