Impex IGS-07 Home Gym User Manual


 
STEP 2 (See Diagram 2)
A.) Align the rear of Upper Frame (#8) to the Rear Vertical Beam (#19). Attach the Top
Socket Assembly (#14) to the joint. Secure it with four M12 x 3 1/8” Carriage Bolts
(#11), 1” Washers (#12), and M12 Aircraft Nuts (#13). Do not tighten the bolts yet.
B.) Place the Upper Frame onto the open bracket on the Front Vertical Beam (#22). Secure
it with one M10 x 3” Allen Bolt (#44), two ¾” Washers (#43), and one M10 Aircraft Nut
(#5). Securely tighten all bolts previously installed.
C.) Attach the Foot Plate Support (#40) to the Base Frame (#45). Secure it with two M12 x
1” Allen Bolts (#29) and 1” Washers (#12).
D.) Attach the Foot Plate (#41) to the Foot Plate Support (#40). Secure it four M10 x 1” Allen
Bolts (#42), ¾” Washers (#43), and M10 Aircraft Nuts (#5).
5