Filter
Top Products
STEP 3 (See Diagram 3)
A.) Attach the hole-side of Backrest Supports (#9) to the pivot on the Main Seat Support
(#4). Secure it with one M12 x 5 7/8” Hex Bolt (#13) and M12 Aircraft Nut (#37). Place
the other end of Backrest Supports rest against the Backrest Adjustment Bar.
B.) Place the Backrest Board (#17) onto the Backrest Supports (#9). Secure it with four
M6 x 1 3/8” Hex Bolts (#31) and ∅ ½” Washers (#35).
C.) Place the Seat (#18) onto the Main Seat Support (#4). Secure it with four M6 x 1 3/8”
Hex Bolts (#31) and ∅ ½” Washers (#35).
DIAGRAM 3
DIAGRAM 3DIAGRAM 3
DIAGRAM 3
6