Filter
Top Products
ASSEMBLY INSTRUCTION
Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen
Wrenches
NOTE: It is strongly recommended two or more people to assemble this machine to
avoid possible injury.
STEP 1 (See Diagram 1)
A.) Connect the Left Upright Beam (#1) and Right Upright Beam (#2) by a Cross Brace
(#3) in the mid-span. Align the holes and secure each end of the Cross Brace with one
Bracket (#16), two M10 x 2 ½” Carriage Bolts (#28), two ∅ ¾” Washers (#33), and two
M10 Aircraft Nuts (#38).
B.) Place Backrest Adjustment Bar (#5) between the two Upright Beams on the selected
bar holder to obtain desired incline of Backrest.
C.) Insert two Crutches (#7) into the top openings on the Upright Beams. Secure them with
two Lock Knobs (#41) through selected holes to obtain desired height of the Supports.
DIAGRAM 1
4