Filter
Top Products
7
2. Attach two Round Base Pads (57) and an Extension Leg
P
ad (61) to the Upright Base (69) and Extension Leg
(63) with four 1” Tek Screws (39) as shown.
63
61
57
69
39
39
39
2
3. Attach a Wheel (66) to the Upright Base (69) with a
Wheel Bolt (64) and a Nut (13) as shown.
Do not over-
tighten the Wheel Bolt; the Wheel should turn freely.
With the help of a second person, carefully tip the tread-
mill onto its other side.
66
13
69
64
3
4. Partially fold the Frame (86) so the treadmill is more sta-
ble. Do not fully fold the treadmill until it is com-
pletely assembled.
Hold the Left Upright (7) against the Upright Base (69).
Start a 3” Upright Bolt (21) and a 1” Upright Bolt (76)
with 5/16” Star Washers (95) into the Upright Base and
the Left Upright as shown. Do not tighten the Bolts
yet.
86
7
4
95
76
21
69