Filter
Top Products
6
7. While another person holds the Handlebar Post (6)
near the Frame (1), connect the Extension Wire
(18) to the Lower Wire Harness (44).
Next, slide the Handlebar Post (6) onto the Frame
(1). Attach the Handlebar Post with four M8 x 15mm
Button Screws (7) and four M8 Black Flat Washers
(57).
6. Hold the Handlebar (16) near the Handlebar Post (6).
Connect the wire harness to the Extension Wire (18).
Attach the Handlebar (16) to the Handlebar Post (6)
with four M6 x 20mm Button Screws (25) and four
M8 Black Flat Washers (57).
5. Hold the Console Base (9) near the Handlebar (16).
Insert the wire harness through the indicated hole in
the handlebar. Next, connect the two pulse wires to
the two Wires (22) extending from the Handlebar.
Attach the Console Base (9) to the Handlebar (16)
with four Console Screws (20). Be careful to avoid
pinching the wires.
5
9
22
Hole
16
20
16
6
6
7
18
44
57
1
25
57
18
7
6
Pulse
Wires
Wire
Harness
Wire
Harness