Filter
Top Products
8
8. Place the Seat Mounting Bracket (23) on the Bench
Frame (5) so that the Seat Adjustment Bracket (36)
fits over the welded pin on the side of the Bench
Frame.
Lubricate an M10 x 80mm Bolt (31). Attach the
Seat Mounting Bracket (23) to the indicated bracket
on the Bench Frame (5) with the Bolt and an M10
Nylon Locknut (11). Note: Do not over tighten the
Nylon Locknut; the Seat Mounting Bracket must
pivot easily.
8
5
11
36
23
31
Welded
Pin
Lubricate
7. Press the 20mm x 50mm Inner Cap (33) into the
open end of the Seat Mounting Bracket (23).
Lubricate an M8 x 70mm Bolt (41). Attach the Seat
Adjustment Bracket (36) to the indicated side of the
Seat Mounting Bracket (23) with the Bolt and an M8
Nylon Locknut (42). Note: Do not over tighten the
Nylon Locknut; the Seat Adjustment Bracket
must pivot easily.
7
33
42
41
23
36
Lubricate
9. Turn the Seat (14) as shown. Attach the wide end
of the Seat to the bracket on the Seat Mounting
Bracket (23) with two M6 x 16mm Screws (3).
Tilt the Seat Mounting Bracket (23) upwards and
attach the narrow end of the Seat (14) to the Seat
Mounting Bracket with an M6 x 35mm Bolt (34) and
an M6 Washer (30).
10. Attach the Adjustable Bench Leg (2) to the Bench
Leg (1) with the Adjustment Knob (37).
Insert a 45mm Square Inner Cap (40) into the top
of the Adjustable Bench Leg (2).
9
3
34
30
23
14
Bracket
10
1
2
40
37