Filter
Top Products
32
Three-Piece Cranks
(various models)
Maintenance:
Both Crank Arms (A) were tightened to the spindle (B) at the factory. After riding the
bicycle the fi rst few times, make sure the crank arms have not loosened. If either
crank arm has loosened during this “break-in” period, re-tighten or have it tightened
by a bicycle service shop.
A
B
g 24
Frequently check the tightness of the crank arms. If loose, tighten or have them tight-
ened by a bicycle service shop.
WARNING: If you ride the bicycle with a loose crank arm, the crank arm may
fall off. The spindle may also damage the crank arm.
NOTE: Torque crank arm nut to 395 in-lbs.
Maintenance