Filter
Top Products
18
Pedal Installation
CAUTION: There is a right pedal marked “R” and a left pedal marked “L”.
• The pedal marked “R” has right-hand threads. Tighten it in a clockwise direc-
tion.
• The pedal marked “L” has left-hand threads. Tighten it in a counterclockwise
direction (anti-clockwise).
• Turn the right pedal marked “R” into the right side of the crank arm, and the left
pedal marked “L” into the left side of the crank arm.
Tighten the pedals (fi g 09):
• Make sure the threads of each pedal are fully into the crank arm.
• Make sure pedals are fully tightened with wrench.
NOTE: The recommended torque (tightness) for each pedal is 30 ft.-lbs.
g 09
R
L
Note: A Pedal Wrench is preferred for attaching Pedals. An open-end
wrench can also be used as shown.
WARNING: Ensure pedals are secure in crank arms so they will not loosen.
Periodically check tightness.
Assembly