Filter
Top Products
20
ID# M6809011 12/06
Apply Height Adjustment and Moving Label (33) to front of
pole, where it is clearly visible.
7.
8.
B.
D.
C.
A.
Install
net (43).
568090 11/06
1
3
2
MOVING SYSTEM
HEIGHT
ADJUSTMENT
1. While holding pole, rotate basketball sytem
forward until wheels engage with ground.
2. Move basketball system to desired location.
3. Carefully rotate basketball system upright.
4. Check system for stability.
B
A
Rotate crank
handle to raise
and lower
backboard.
Do not over crank
handle beyond the
manufactured height
indicator range of
7-1/2 - 10 feet.
Damage may be
caused to the screw
jack’s internal
adjustment
mechanism if
adjusted over 10 or
under 7-1/2 feet.
33
34
39
28
DO NOT OVER-CRANK HANDLE
BEYOND THE MANUFACTURED
HEIGHT-INDICATOR RANGE OF
7-1/2 - 10 FEET. DAMAGE MAY
BE CAUSED TO THE SCREW
JACK’S INTERNAL
ADJUSTMENT MECHANISM IF
ADJUSTED OVER 10 OR UNDER
7-1/2 FEET.
HEIGHT AND MOVING LABEL
MUST NOT OBSTRUCT
FACTORY ATTACHED WARNING
LABEL.
B
A
Handle (21) can
be removed and
stored by
removing pin
(22).
NOTE:
Cover plate (28) will fit
INSIDE back bracket.
NOTE:
22
21
43
34
43
34
9.
RIM COVER ATTACHMENT
39
CAUTION!