Filter
Top Products
12
ID# M611701 12/05
Pole bracket (20) will need to be lightly pressed into
backboard ribbing. Be sure to press completely into
place. Attach rim (18) to backboard (22) and pole
bracket (20) with knob (17), reinforcement
bracket (11), and carriage bolt (16) as shown.
Tighten knob completely.
PRESS BRACKET (20)
INTO PLACE HERE
XSHBM01.EPS
211208
SAWHORSE OR SUPPORT TABLE
16
17
11
20
18
7.
Carefully tip unit forward and slide
backboard assembly onto pole as shown.
KNOB MUST BE TIGHTENED
COMPLETELY AND
CHECKED FOR TIGHTNESS
BEFORE EACH USE.
WARNING!
S
AWHORSE OR SUPPORT TABLE
22