Filter
Top Products
13
06/03 P/N 211543B
42
27
29
29
47
59
59
26.
Insert handle assembly through pole mount
assembly as shown. Lock pole assembly in
place at the 10’ (3.05m) mark with pin (55).
55
A
C
B
To Set Backboard Height:
A. While holding handle, remove pin (55).
B. Move elevator up or down to desired height.
C. Replace pin full length to lock system at desired
height.
55
25.
HEIGHT ADJUSTMENT
27.
Attach adjustment rod (47) to lower
elevator tubes (27) using bolt (27) spacer
(59) and nut (42) as shown.