Horizon Fitness Ti 10K Treadmill User Manual


 
POSITIONING PEDOMETER
Attach the pedometer to your belt, skirt, waistline, etc, with the clip located on the
back of the pedometer. Do NOT place the pedometer in line with the center of your
body. Instead position the pedometer to the left or right of the center of your body to
ensure proper step count during your workout. Be sure to attach the pedometer
horizontally and securely enough that it will not become dislodged during workout.
WIRELESS PEDOMETER INSTRUCTIONS
TO COUNT YOUR STEPS
TO TRANSMIT YOUR STEPS
POWER ON/DISPLAY STEP COUNT:
• Press .
• Displays step count accumulated since the unit was last reset.
DISPLAY ACCUMULATED TIME
• Press again.
• Displays time accumulated since the unit was last reset.
• Shown as hours-minutes
RETURN TO STEP COUNT
• The display will automatically return to step count after 5 seconds.
RESET STEP COUNT AND ACCUMULATED TIME
• Hold for 2 seconds.
TRANSMIT STEP COUNT
• Hold for 2 seconds.
• The display will read, ¡°Send¡± while the transmission takes place.
• The step count will automatically update during the workout.
• The program will end when the step count goal is reached.
NOTE: Transmission can take up to 15 seconds.
The pedometer may transmit in either step count mode or accumulated time mode.
LIMITED
WARRANTY
INTRODUCTION
IMPORTANT
PRECAUTIONS
KNOW
YOUR TREADMILL
BEFORE
YOU BEGIN
TREADMILL
OPERATION
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
16