Filter
Top Products
11
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
TREADMILL
OPERATION
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
A Open HARDWARE BAG 3.
B
Slide the HANDLEBAR ExTENSION
onto the CONSOLE HANDLEBAR.
C Insert BOLTS (E) into HANDLEBAR
ExTENSION
and fully tighten.
D
Align the lower part of the
HANDLEBAR ExTENSION
with the
center of the CONSOLE MAST.
E Insert BOLTS (F) and ARC WASHER
(D) through bottom holes of
HANDLEBAR ExTENSION
into
CONSOLE MAST and fully tighten.
F Repeat on other side.
A S S E M B LY S T E P 3- B (T72 model)
HANDLEBAR
EXTENSION
& BOLT (F)
BOLT (E)
ARC WASHER (D)
CONSOLE MAST
CONSOLE
T72
BOLT (E)
10 mm
Qty: 2
BOLT (F)
115 mm
Qty: 2
angle view
ARC WASHER (D)
Qty: 2
HARDWARE BAG 3 CONTENTS : T72
BRACKET
SUPPORT BAR
Please note that for STEP C,
the bracket should be on
the outside of the support
bar as shown in the
drawing to the left.