Filter
Top Products
paragon II
10
paragon II
19
PAUSE
Press the Stop button to pause your workout.
RESET
Press and hold the Stop button to reset the treadmill.
CENTERING THE BELT
If the running belt is too far to the right side, use the supplied
Allen wrench to turn the right tension bolt clockwise 1/4 turn at
a time until the belt remains centered during use.
If the running belt is too far to the left side, turn the left tension
bolt clockwise 1/4 turn at a time until the belt remains centered
during use.
If the belt is too far to the left side:
1) Turn the left roller bolt 1/4 turn clockwise (tighten).
If the belt is too far to the right side:
1) Turn the right roller bolt 1/4 turn clockwise (tighten).
Quick Speed Keys
When in a program, the user is able to press any of the desired quick speed
keys to get to a specific speed more quickly. Note: When in a speed-based
program, if the user presses any of the quick speed keys, all of the remaining
speed segments in the program will be modified as well. For example, when in
P2, the first segment default speed is 2.5 mph. If the user presses the 4 mph
quick speed key, all of the remaining segments will increase by 1.5 mph as well.
Changing the Speed or Elevation
When in a program, the user is able to change the difficulty of the program by
pressing the speed or incline by pressing the plus (+) or minus (-) buttons to
the desired level. Note: The user is only able to increase or decrease the ele-
vation or speed during the program. When in a program, if the user increases
or decreases the difficulty of speed or elevation, all of the remaining program
speeds or elevation segments will be modified as well. For example, when in
P2, the first segment default speed is 2.5 mph. If this speed is increased by 1
mph, all of the remaining segments will be increased by 1mph as well.
paragon II owner’s guide v1.1.qxd 8/14/2001 4:48 PM Page 11