Horizon Fitness CE5.1 Elliptical Trainer User Manual


 
14
BOLT (O)
SPRING WASHER (B)
FLAT WASHER (E)
FLAT WASHER (K)
BOLT (M)
NUT (J)
LOWER HANDLEBAR
SPRING WASHER (B)
TEFLON WASHERS (P)
LOWER LINK ARM
PEDAL ARM BRACKET
ASSEMBLY STEP 5
ALL
MODELS
A Open hardware bag 5.
B Slide lower link arm onto pedal arm
bracket.
C Attach lower link arm to pedal arm
using 1 flat washer (k), 1 spring
washer (b) and 1 bolt (m).
D Align opposite end of lower link arm with
bracket on bottom of lower handlebar.
E Place teflon washers (p) on both sides of
the lower link arm. While holding teflon
washers (p) slide lower link arm into
bottom end of lower handlebar.
F Secure the joint with 1 flat washer (e), 1
spring washer (b),1 bolt (o) and secure
with 1 nut (j).
G Repeat steps B–F on the opposite side of the
elliptical.
BOLT (M)
20 mm
Qty: 2
SPRING WASHER (B)
15 mm
Qty: 4
FLAT WASHER (K)
20 mm
Qty: 2
TEFLON
WASHER (P)
28.4 mm
Qty: 4
FLAT WASHER (E)
17 mm
Qty: 2
NUT (J)
Qty: 2
BOLT (O)
70 mm
Qty: 2
HARDWARE BAG 5 CONTENTS :
EX-78 SHOWN