Filter
Top Products
BEFORE
YOU BEGIN
12
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
ELLIPTICAL
OPERATION
LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
CONDITIONING
GUIDELINES
NOTE: There is NO hardware bag for this step.
All hardware is pre-installed.
A) Snap the front and back HANDLEBAR
COVERS together onto the UPPER HANDLE
BARS.
Note the position of the snap tabs on the
covers before snapping into position.
B) Attach the CONSOLE WIRES to the
CONSOLE.
C) Carefully tuck the CONSOLE MAST wires
into the CONSOLE MAST before attaching
the CONSOLE.
D) Attach CONSOLE to the CONSOLE MAST
using the 4 PRE-ATTACHED SCREWS
(screws will have to be removed from the
console first).
DO NOT PINCH WIRES!
Y O U ’ R E F I N I S H E D !
NUT (K)
INSIDE DIAMETER:
8 mm
Qty: 2
BOLT (J)
60 mm
Qty: 2
SPACER (H)
44 mm
Qty: 2
TEFLON WASHER (I)
28.4 mm
Qty: 4
SCREW (L)
Qty: 2
HARDWARE BAG FOR STEP 5 CONTENTS :
CONSOLE
CONSOLE MAST
CONSOLE WIRES
PRE-ATTACHED
SCREWS
FRONT
HANDLEBAR
COVER
FRONT
HANDLEBAR
COVER
BACK
HANDLEBAR
COVER
A S S E M B LY S T E P 5 (CONTINUED)
Connect AC ADAPTOR to the AC ADAPTOR INPUT, located at front of the main frame. Connect
ADAPTOR to a power outlet. After a “beep”, the CONSOLE will light up.
A S S E M B LY S T E P 6