Filter
Top Products
26
Your Horizon Fitness upright bike is designed to be reliable and maintenance free. However, if you do
experience problems with your upright bike, please reference the troubleshooting guide listed below.
PROBLEM: There is no display on the console.
SOLUTION: Check the power supply connections at the wall outlet and the rear of the bike (B52HR
model only) or batteries in the back of the console (B51 model only), also remove the console and
verify that the console cable is attached properly, making sure that the cable is securely inserted into
the console.
PROBLEM: The upright bike makes a squeaking or chirping noise.
SOLUTION: Loosen all bolts attached during the assembly process, grease the threads and tighten
again.
PROBLEM: The resistance levels seem to be incorrect, seeming too hard or too easy.
SOLUTION: Reset the console and allow the resistance to reset to the default position. Restart the
console and retry the resistance levels. (B52HR only)
Check your exercise environment for sources of interference such as high power lines, large motors,
etc.