Healthrider HTL13940 Treadmill User Manual


 
23
THE INFORMATION MODE/DEMO MODE
The console features an information mode that keeps
track of the total number of hours that the treadmill has
been operated and the total number of miles or kilome-
tres that the walking belt has moved. The information
mode also allows you to switch the console from miles
per hour to kilometres per hour. In addition, the infor-
mation mode allows you to turn on and turn off the
demo mode.
To select the information mode, hold down the Stop
button while inserting the key into the console. When
the information mode is selected, the following informa-
tion will be shown:
The Distance/Incline display
will show the total number of
miles (or kilometres) that the
walking belt has moved.
The Pace/Time display will
show the total number of
hours the treadmill has been
used.
An “E” for English miles or an
“M” for metric kilometres will
appear in the Speed display.
Press the Speed increase
button to change the unit of
measurement.
IMPORTANT: The Calories/Pulse display should be
blank. If a “d” appears in the display, the console is in
the “demo” mode. This mode is intended to be used
only when a treadmill is displayed in a store. When the
console is in the demo mode, the power cord can be
plugged in, the key can be removed from the console,
and the displays and indicators on the console will au-
tomatically light in a preset sequence, although the
buttons on the console will not operate.
If a “d” appears
in the Calories/Pulse display when the information
mode is selected, press the Speed decrease button
so the display is blank.
To exit the information mode, remove the key.