Filter
Top Products
16
T
urn on the fan if desired.
To turn on the fan at low speed, press the Fan
button. To turn on the fan at medium speed, press
the button a second time. To turn on the fan at
h
igh speed, press the button a third time. To turn
off the fan, press the Fan button again. Note: If
the fan is on when the walking belt stops, the fan
will automatically turn off after a few minutes.
When you are finished exercising, remove the
key.
Step onto the foot rails, press the Stop button, and
adjust the incline of the treadmill to the lowest set-
ting.
The incline must be at the lowest setting
when the treadmill is folded to the storage posi-
tion or the treadmill will become damaged. Next,
remove the key from the console and put it in a se-
cure place.
When you are finished using the treadmill,
switch the reset/off circuit breaker to the “off”
position and unplug the power cord.
HOW TO USE A PRESET PROGRAM
Insert the key into the console.
S
ee HOW TO TURN ON THE POWER on page
14.
S
elect a preset program.
To select a preset program, press the Weight
Loss Programs (WT LOSS PGMS) button, the
Fitness Programs (FITNESS PGMS) button, or
the Incline Programs (INCLINE PGMS) button re-
peatedly.
When a preset program is selected, the display
will show the program number, the maximum in-
cline setting and the maximum speed setting of
the program, and the program time. In addition, a
profile of the speed settings of the program will
scroll across the matrix. Note: When a Weight
Loss program is selected, the display will also
show the approximate number of calories that will
be burned during the workout.
Each preset program is divided into several one-
minute segments. One speed setting and one in-
cline setting are programmed for each segment.
Note: The same speed setting and/or incline set-
ting may be programmed for two or more consec-
utive segments.
Press the Start button to start
the program.
A moment after the button is pressed, the tread-
mill will automatically adjust to the first speed and
incline settings of the program. Hold the handrails
and begin walking.
Each program is divided into several one-minute
segments. One speed setting and one incline set-
ting are programmed for each segment. Note: The
same speed setting and/or incline setting may be
programmed for two or more consecutive seg-
ments.
3
2
1
9
8