Healthrider HRTL08980 Treadmill User Manual


 
6
SETTING UP THE TREADMILL
Set-up requires two people. Place the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until the treadmill is set up. No tools are required.
1. With the help of a second person, carefully raise the
Uprights (82) until the Front Wheels (77) are resting on
the floor as shown.
2. Remove the paper backing from the Wrench Clip (71).
Press the Wrench Clip onto the Frame (92) in the indi-
cated location. Press the Allen Wrench (72) into the
Wrench Clip. Note: The use of the Allen Wrench is
described on pages 16 and 17.
1
77
72
92
71
3. Make sure that all parts are tightened before you use the treadmill. Place a mat beneath the treadmill
to protect the floor or carpet. For your benefit, we recommend that you familiarize yourself with the
ÒTROUBLE-SHOOTING AND MAINTENANCEÓ section on pages 16 and 17 before using the treadmill.
2
82