1) Preheat oven for 15 minutes.
2) Place baking pan in baking slot, then use
pusher end of your pan tool to push pan
into oven.
3) Make sure both metal doors are closed.
4) When baking time is done, use pusher
end of pan tool to push through to cooling
chamber. PAN IS HOT! Cool for ten minutes.
5) Using holder end of pan tool, remove pan.
6) Unplug oven when finished baking. Wait for
oven to cool, then wipe it down.
Oven BasicsInstall Light Bulb
• Loosen screws from battery door and remove
battery door from oven.
• Install one standard 100-watt bulb (regular or
frosted) into the socket in the panel.
• DO NOT use long life, soft white or high
efficiency bulbs, or bulbs of higher or lower
wattage, which will cause oven to work
improperly.
• Replace the door and 4 screws.
Before You Bake:
1. Wash pans with soap and water and dry thoroughly before first use and always after baking.
2. The oven should rest flat on a level surface at all times.
3. Make sure both metal doors inside the oven are closed.
4. Plug in oven and preheat for 15 minutes.
ADULT SUPERVISION RECOMMENDED.