Filter
Top Products
60
HP
Velotechnik
Warranty Pass
Service plan (continued)
parts work
hubs check bearing play and brake discs mount
pedal check bearing play, check binding mechanism
frame check clamping of the front boom
clean and conserve
check for damage, damage to paintwork
quick release check correct closing
derailleur check for movement and function
clean and lubricate
screws and nuts check and tighten
mudguards check for damage and correct position
valves check for correct position and air tightness
stem check clamping
check clamping screws
cables dismount,lubricate, replace if necessary
This service plan is intended to give you a
rough overview over the required maintenan-
ce and service works. In no case it can replace
the detailed instructions in this manual!
You can perform service works marked with a
"
●" if you have the required skills and tools as
for example a torque wrench.
If you discover any defects while checking your
bicycle they have to be repaired immediately. If
you are in doubt please consult your local bike
shop.
Works marked with a "▲" should only be car-
ried out by a trained bicycle mechanic.
At the annual service the bicycle mechanic has
to carry out all works listed as well as all ser-
vices and maintenance works necessary accor-
ding to the momentary technical standard and
professional knowledge.
Please follow at any rate the manuals of the
parts manufacturers.