Filter
Top Products
48
HP
Velotechnik
Seat
For transport purposes you can dismount the
seat. For that purpose open the quick releases
and unscrew the knurled nuts from the axle.
Then remove the quick releases and catch the
washers that come out too.To remount the
seat, do all the steps in reverse order.
Interchanging the seats
In principle you can interchange the different
seat sizes and the seats of the Street Machine
Gt with the Speedmachine.
If the adjusting range of 10° cannot fully be
used after you have exchanged the seat you
will have to slightly reposition the slotted alu-
minum fittings at the seat.
For that purpose, take off the seat cushion.
Undo the self-locking nuts of each of the 4
screws of the upper and lower seat fastening
by several turns.The holes in the aluminum fit-
tings are slightly bigger than the diameter of
the screws so that you can move the alumi-
num fittings up or down to find the biggest ad-
justing range possible.
Finally tighten all screws of the seat fastening
by 8-10 Nm.
Screws that are not tight enough may lead to
cracking noises while riding and may damage
the seat.
Seat