Filter
Top Products
13
S450DLX OWNER’S MANUAL
ACTIVATING AND DEACTIVATING
THE ALARM CLOCK
Press and release the TIMER A or TIMER B button. ‘Timer A’ or ‘Timer
B’ flashes in the display. While it flashes, press ALARM over and over.
A bell “ ,” speaker or nothing appears in the display next to
‘Timer A’ or ‘Timer B’. Select the bell icon to activate the alarm and
set the alarm to go off with a beeping sound. Select the speaker icon
if you wish to wake up to the last radio station tuned to. If nothing is
selected the alarm will be deactivated. Set the volume to a level you
want to hear.
USING THE SNOOZE FEATURE
(top right of radio)
To delay the alarm, the snooze feature can be activated by pressing the
SNOOZE button when the alarm turns on. Once pressed, the alarm will
activate again in 5 minutes. This can be repeated up to 4 times.
USING THE LINE IN/OUT SOCKETS
These sockets are on the right side of the S450DLX, an 1/8 inch stereo
type (3.5 mm). An external audio device (such as an MP3 player) can be
played by connecting an AUX line from the device into the Line-In socket.
The Line-Out socket can be used to feed audio from the S450DLX to
amplified external speakers.
USING THE EARPHONE JACK
The earphone jack can be used with stereo headphones using an 1/8
inch (3.5 millimeter) plug. FM sound is in stereo if the signal is sent in
stereo and the ST position is selected with the BANDWIDTH switch.