Filter
Top Products
750000-INS-LAB-RevC11 15
under the patient's buttock area; your ngers should just
t. If the t is too loose, decrease the setting. If your ngers
do not t well, increase the setting two notches rmer. Wait
ten minutes and then check again. You should only have
to adjust this setting one time per patient. Please consult
your physician for an appropriate setting.
QUICK DISCONNECT
Pull the power plug from the wall connector to disconnect
the device quickly.
TRANSPORT CAP
In case of power failure or transport:
Disconnect the quick connector and
cap the mattress with the transport
cap to slow deation.
CPR FUNCTION
If CPR must be performed on the
patient while the mattress is in use,
to immediately deate the mattress,
either:
1. Pull the CPR valves from the
mattress in the location of the
arrow shown at right, or
2. Disconnect the quick connector
from the pump in the location of
the arrow shown at right.
quick connector
transport cap