Filter
Top Products
20
THE INFORMATION MODE
T
he console features an information mode that keeps
track of treadmill usage information. The information
m
ode also allows you to select miles or kilometers as
the unit of measurement, to select an audio trainer set-
ting, to adjust the volume and to turn on and turn off
the demo mode.
To select the information mode, hold down the Stop
button, insert the key into the console, and then release
the Stop button. When the information mode is se-
lected, the following information will appear in the dis-
play:
The center of
the display will
show the total
number of hours
that the treadmill
has been oper-
ated. The lower
part of the dis-
play will show
total number of miles or kilometers that the walking belt
has moved. In addition, an “E” for English miles or an
“M” for metric kilometers will appear in the lower part of
the display. To change the unit of measurement, press
the Speed increase button.
The upper left part of the
display will show the per-
sonal trainer audio setting. If
you select “ON” as the
audio setting, the personal
trainer will guide you
through your workouts and give detailed instructions. If
you select the “OFF” setting, your personal trainer will
simply guide you through your workouts. Press the
I
ncline decrease button
to change the audio setting if
desired.
You can adjust the volume
of the personal trainer audio
(
0 through 5) by pressing
the Incline increase button
r
epeatedly. The volume set-
ting appears as the upper
right digit in the display.
The console features a dis-
play demo mode, designed
to be used if the treadmill is
displayed in a store. While
the demo mode is turned on,
the console will function nor-
mally when you plug in the power cord, switch the
reset/off circuit breaker to the reset position, and insert
the key into the console. However, when you remove
the key, the displays will remain lit, although the but-
tons will not function. If the demo mode is turned on, a
“d” will appear in the lower right corner of the display
while the information mode is selected. To turn on or
turn off the demo mode, press the Speed decrease but-
ton.
To exit the information mode, remove the key from the
console.