Filter
Top Products
Edge 500 Quick Start Manual 3
2. Place the rubber disk on the back of
the bike mount.
The rubber tabs align with the back
of the bike mount so it stays in
place.
3. Place the bike mount on the bike
stem.
4. Attach the bike mount securely
using the two bands.
Bike mount
notches
Rubber
disk
Bands around
the bike stem
5. Align the tabs on the back of the
Edge with the bike mount notches.
6. Press down slightly and turn the
Edge clockwise until it locks into
place.
1. Turn the Edge clockwise to unlock
the device.
2. Lift the Edge off the mount.