Filter
Top Products
16
Book Card Care
• Do not expose your book
cards to heat, cold, or liquids.
• Do not put excessive weight
on your book cards.
LBS.
• Do not touch the metal
contacts on your book cards.
Caution: Touching these electrical
contacts with statically charged
objects, including your fingers, could
erase information entered in a book
card or built-in book.
Resetting Your BOOKMAN
If the BOOKMAN keyboard fails to re-
spond, or if its screen performs errati-
cally, first press
CLEAR
and then press
ON/OFF
twice. If nothing happens, follow
the steps below to reset it.
Warning: Pressing the reset button with
more than very light pressure may perma-
nently disable your BOOKMAN. In addition,
resetting your BOOKMAN unit erases set-
tings and information entered into its built-
in book, and in an installed book.
1. Hold
CLEAR
and press
ON/OFF
.
If nothing happens, try Step 2.
2. Use a paper clip to gently press
BOOKMAN’s reset button.
This unit may change operating modes
due to Electro-static Discharge. Normal
operation of this unit can be re-estab-
lished by pressing the reset key,
ON/OFF
,
or by removing/replacing batteries.
➤ Troubleshooting BOOKMAN
• Make sure your book card, if any,
is installed correctly.
•
Check that your book card’s metal
contacts are dirt-and dust-free.