Franklin DBD-3040 Games User Manual


 
1. Turn your product off.
2. Turn your product over.
3. Align the tabs on the book card
with the notches in the slot.
4. Press the book card down until
it snaps into place.
Installing Book Cards
37
Once a book card is installed in the product,
you can select which book you want to use.
1. Turn your product on.
2. Press KARTE.
These are sample books.
3. Press or to highlight
your selection.
For information on available Franklin
BOOKMAN products, highlight the
BOOKMAN Info Icon, .
4. Press EINGABE to select it.
Selecting a Book
Removing Book Cards
Warning: Never install or remove a
book card while your product is on. Any
information that was entered in the built-
in book or book card will be erased.
Book Card Troubleshooting
If your book card is performing errat-
ically, follow the reset instructions for
your platform. If this does not fix the
problem, remove the book card and
then remove the white rubber strip
located between the two metal pins.
Clean the rubber strip with your fin-
gers and then replace it making sure
it is completely in its notch.
About Screen Illustrations
Some screen illustrations in this
User’s Guide may differ slightly from
what you see on screen. This does
not mean that your product is mal-
functioning. The examples in the
English half of this manual use
English as the message language.