Filter
Top Products
14
Model X-12 Owner's Manual
The following table indicates the switch and knob settings used for overdubbing to
Tracks 3 and 4. Refer to this table and to the steps described on the previous page
to overdub the keyboard to Track 3 and vocal to Track 4.
<Using the Playback [PAN] knob>
When you are monitoring the recording sound and playback sound simultaneously,
refer to the table below for the relationship between the position of the [PAN] knob
and the sound balance.
Adjust the balance according to your needs. The recording sound will be always
positioned in the center.
Sound source
Playback [PAN] knob
Plug the mic into the
[INPUT] jack.
Adjust the playback sound
for comfortable monitoring
(Refer to <Using the
Playback [PAN] knob>
below).
Adjust the playback sound
for comfortable monitoring
(Refer to <Using the
Playback [PAN] knob>
below).
Overdubbing the
keyboard to
Track 3
Overdubbing the
Vocal to Track 4
Plug the keyboard
output to the
[INPUT] jack.
[REC TRACK]
selector
Select track 4
for recording.
Select track 3
for recording.
Adjust playback levels of
tracks 1 and 2 with playback
faders 1 and 2.
Adjust playback levels in
tracks 1 - 3 with playback
level faders 1, 2 and 3.
Playback level fader
[LINE-MIC] knob
Adjust to optimum
level by CCW rotation
(LINE) of the knob.
Adjust to optimum
level by rotating the
knob CW (MIC).
[PAN] position Monitoring sound position
Center
Both playback sound and recording sound will be
centered.
Hard "R"
The playback sound will be positioned on the right
and the recording sound will be centered.
Hard "L"
The playback sound will be positioned on the left
and the recording sound will be centered.
PA N
R
L
PA N
R
L
PA N
R
L