Filter
Top Products
5
5
• Fit the net tube through the sleeve in the center of the net.
8
ASSEMBLY
ASSEMBLY
Post
Cover
Post
Cover
• Fit a post cover over the end of a side tube and onto a post.
• Insert five #8 x
3
/
4
” screws into the post cover and tighten.
• Repeat this procedure to attach the other post cover.
9
• Line up the holes in the ends of the net tube with the hole in
each side tube.
• Insert a #10 x 1
1
/
2
” screw into each side tube and tighten.
10
Net Tube
Net Tube
Side
Tube
• Line up the holes in a plastic tab on the net side flap with the
holes in the post.
• Insert three #8 x
3
/
4
” screws into the plastic tab and tighten.
• Repeat this procedure to attach the plastic tab on the other
net side flap to the post.
Plastic Tab
Plastic Tab
11