Filter
Top Products
14
M5 Lock Nuts
M5 x 29 mm
Bolts
STEP 2
Tip: You will need to lean the assembly against
a wall or an object to complete this step.
• Insert an M5 x 29 mm bolt through the outside of the
L tube.
• Fit an M5 lock nut, rounded side out, to the matching
hex hole in the crossbar.
• While holding the lock nut in place, tighten the bolt.
• Fit another M5 lock nut and M5 x 29 mm bolt to the
crossbar and L tube and tighten.
Tip: If you cannot attach the M5 lock nut to the end
of the M5 x 29 mm bolt, you have assembled the crossbar incorrectly to the
L tubes. Turn the crossbar around. Make sure the white dot on the crossbar
matches the white dot on one of the L tubes.
Rounded
Side