Filter
Top Products
Reset Switch
16
Mode II - Pro Driver
• Press the forward button
on the remote controller.The
car moves forward.
• Press the reverse button on
the remote controller. The car
moves backward.
• Use the wheel on the remote
controller to maneuver around
the track or past obstacles.
Note: The range of the remote
controller to the car is 15 feet
(with no obstructions).
Reverse
Forward
Wheel
ON/OFF
Button
• Turn the control tower power
on to hear sound effects each
time the car drives over the
starting ramp.
• Be sure the reset switch on the
control tower is set to the on
position .
• Press the ON/OFF button on the
front of the control tower to turn
power on. While power is on, the
button will not light because the
track is not connected to the
control tower in this mode.
Hint: If the car hasn’t driven
past the control tower for a few
minutes, the tower turns off
automatically. Press the ON/OFF
button again for power.