Filter
Top Products
4
4
Assembly
• Position the base on a flat surface.
• Insert and snap the tabs on the
lower ball chute into the slots in
the base.
Hint: The lower ball chute can only
be assembled to the base one way.
If the lower ball chute tabs do not
fit in the slots in the base, turn the
lower ball chute around and try again.
3
Upper
Chute
• Insert two screws through the
upper chute and into the back-
board. Tighten the screws with
a Phillips screwdriver. Do not
over-tighten.
Base
Lower
Chute
Backboard
Slot
Slot
Tab
Tab