Filter
Top Products
3
Assembly
1
2
• Position the upper chute so that
the open side is up.
• Slide the rim of the post into the
slot in the upper chute.
Hint: The post can only be
assembled to the upper chute one
way. If the post rim will not fit in the
upper chute slot, turn the post over
and try again.
• Push the post rim down firmly
into the slot.
Tabs
• Place the backboard face down.
• Fit the rim on the post into the
slot in the backboard. Make sure
the tabs on the upper chute fit
into the slots in the backboard.
Slot
Slot
Post
Rim
Rim
Upper
Chute
Backboard
Slots
Upper Chute