Filter
Top Products
Thank you for purchasing this night vision device brought to
you by Famous Trails. We hope it will bring you many years
of viewing pleasure.
“ Starlight” or “ Night Vision” devices work by amplifying
ambient light thousands of times to create a visible electronic
image. Even starlight or partial moonlight can often provide
enough light to allow for viewing. However, please remember that
your starlight device is a sophisticated opto-electronic instrument
and should be used with the following in mind:
DO NOT ACTIVATE THE DEVICE DURING THE DAY
WITH THE LENS COVER REMOVED.
Getting Started
1. Load batteries in battery compartment, either on top or side
depending on the unit. Use either AAA or AA batteries.
2. To use, depress the Energizer button, and release. A gradual
fading of the image is typical. Press the Energizer button
again to re-power. If your unit includes a self-energizing
power source (i.e., does not require batteries), simply depress
and release the top lever one time and repeat as necessary.
3.
The infrared (IR) illuminator works to enhance the available
ambient light in areas of extreme darkness, or brighten the
electronic image in very dim ambient light. Utilize as needed
by depressing the IR button (next to the Energizer button on
most units). Also, please note that on self-energizing units
Owners Manual