Filter
Top Products
assembly instructions
-9-
Step 4:
Cap the Leg Press Support (205) with four 50
Sq End Plugs (217). Insert the six 3/4" Bushings
(222) into the holes in the Leg Press Support
(205). Slide the Leg Press Support (205) onto
the Rear Connect Frame (201) and secure using
two 1/2" Nylon Nuts (237) and two 1/2" Washers
(235) as shown in FIG 3.
Cap the Lever Block (206) with the 50 x 75 Rect
End Cap (218). Attach the Stopper (224) to the
Lever Block (206) using the 3/8" x 5/8" Sunken
Head Screw (234). Attach the Lever Block (206)
to the Leg Press Support (205) using two 1/2"
Nylon Nuts (237) and two 1/2" Washers (235)
as shown in FIG 4.
ASSEMBLY
FIG-3
201
(See FIG-3)
237
235
237
235
206
218
224
234
217
217
222
205
222
217
217
222
237
235
235
237
201
FIG-4
205