Filter
Top Products
Step 6:
ROUTING THE LOWER CABLE:
Attach the Single Pulley Block (210) to the
Base Frame (1) using two 3/8" x 3" Hex
Head Bolts (230), four 3/8" Washers (236)
and two 3/8" Nylon Nuts (238) as shown
in FIG G3.
To fit the Lower Cable (36) correctly you
will need to add some slack to the cable.
Adjust the slack in the cable by adjusting
the pulley T7, L4 positions on the Adj
Floating Pulley Block (22) as shown in FIG
T7,L4.
Route the Lower Cable (36) beneath pulley
G1, up and around pulley G2, down and
through pulley G3 and L3. Attach the
various pulleys as shown.
ASSEMBLY
assembly instructions
-11-
L3
L2
L4
T7
G1
G3
G2
36
LOWER CABLE (36)
236
238
230
236
223
223
215
3
FIG-G1FIG-T7,L4
35
36
38
77
22
75
68
75
LOWER CABLE PATH
231
230
215
210
238
236
1
36
236
FIG-G3
238
207
214
206
229
FIG-G2