Evo Fitness 53552 Home Gym User Manual


 
assembly instructions
-8-
Step 3:
Insert two 50 Sq Bushings (221) into the
upper tube on the Main Frame (202).
Slide the Hand Grips (212) onto the Seat
Handle Bars (204). If the Hand Grips
(212) are difficult to slide onto the Seat
Handle Bars (204) try applying a small
amount of soapy water to the Seat
Handle Bars (204) prior to sliding on the
grips. Attach the Seat Hand Bars (204)
to the Main Frame (202) using two 3/8"
x 3" Hex Head Bolts (230), four 3/8"
Washers (236) and two 3/8" Nylon Nuts
(238). Attach a Seat / Back Pad (211)
to the Main Frame (202) using two 3/8"
x 2-1/2" Hex Head Bolts (232) and two
3/8" Washers (236) as shown in FIG 1.
Cap the Adj Back Bone (209) with two
1" x 2" Rect End Plugs (219) and one
50 Sq End Plug (217). Attach a Seat /
Back Pad (211) to the Adj Back Bone
(209) using two 3/8" x 1-1/2" Hex Head
Bolts (233) and two 3/8" Washers (236).
Insert the Adj Back Bone (209) assembly
into the upper tube (welded on Main
Frame) and lock with the Quick Release
(225) as shown in FIG 2.
ASSEMBLY
FIG-1
FIG-2
211
219
219
236
236
209
217
233
233
225
212
202
212
211
204
221
232
221
204
236
236
238
236
230
201
203
201
203