Filter
Top Products
10
FEATURES OF THE CONSOLE
The treadmill console offers an impressive array of
features designed to make your workouts more effec-
tive.
When the manual mode of the console is selected, the
speed and incline of the treadmill can be changed with
the touch of a button. As you exercise, the console will
display instant exercise feedback. You can even mea-
sure your heart rate using the handgrip pulse sensor or
the optional chest pulse sensor (see page 20).
In addition, the console offers eight preset programs.
Each program automatically controls the speed and in-
cline of the treadmill as it guides you through an effec
-
tive workout. Two heart rate programs are also offered.
Each program automatically adjusts the speed and in-
cline of the treadmill to keep your heart rate within a tar-
get range while you exercise. The console even allows
you to create your own programs and save them in
memory for future use. Note: The heart rate programs
require the use of the optional chest pulse sensor.
To use the manual mode of the console, follow the
steps beginning on page 11.
To use a preset pro-
gram, see page 14. To create and use a custom
program, see pages 16 and 17. To use a heart rate
program, see page 18.
HOW TO TURN ON THE POWER
Note: If there is a sheet of clear plastic on the con-
sole, remove the plastic. To prevent damage to the
walking platform, always wear clean shoes while
using the treadmill. The first time the treadmill is
used, observe the alignment of the walking belt,
and center the walking belt if necessary (see page
24).
Plug in the power cord (see
page 9). Next, locate the
reset/off circuit breaker on
the treadmill frame near the
power cord. Make sure that
the circuit breaker is in the
reset position.
Stand on the foot rails of the treadmill. Find the clip at-
tached to the key (see the drawing above), and slide
the clip onto the waistband of your clothes. Next, insert
the key into the console. After a moment, the displays
and various indicators will light.
Test the clip by care-
fully taking a few steps backward until the key is
pulled from the console. If the key is not pulled
from the console, adjust the position of the clip.
Key
Clip
Reset
Position