Epic Fitness ECTL09706.1 Treadmill User Manual


 
8
2. Identify the Left Upright (73) and the Right
Upright (74). Hold the Right Upright near the
R
ight Base Cover (77) as shown. Feed the
Upright Wire Harness (75) up into the rectangu-
l
ar hole in the bottom of the Right Upright and
out of the top of the Right Upright.
Gently pull up on the Upright Wire Harness (75)
as you set the Right Upright (74) on the Base
(83) inside the Right Base Cover (77). Be care-
ful not to pinch the Upright Wire Harness.
Attach the Right Upright (74) to the Base (83)
with two Upright Bolts (72) and two Star
Washers (90). Note: It may be necessary to tip
the tops of the Uprights forward slightly as you
thread the Upright Bolts (72) into the Uprights.
Hold the Left Upright (73) near the Left Base
Cover (76), and insert the TV Cable (49) and the
AV Cable (97) up into the rectangular hole in the
bottom of the Left Upright and out of the top of
the Left Upright. Attach the Left Upright to the
Base (83) with two Upright Bolts and two Star
Washers (not shown).
With the help of a second person, lower the
treadmill off the cardboard stand.
83
76
75
77
2
74
73
4
9
97
90
72
3. Identify the Right Upright Sleeve (96) and the
Left Upright Sleeve (95). Slide the Right Upright
Sleeve onto the Right Upright (74) and the Left
Upright Sleeve onto the Left Upright (73).
95
“Right”
“Left”
96
3
74
73