Filter
Top Products
18
H
OW TO OPERATE THE PERSONAL TELEVISION
IMPORTANT: Before operating the television, you
must connect an antenna, a 75 ohm CATV cable, or
a VCR to the 75 ohm antenna terminal on the tread-
m
ill, a VCR or DVD player to the three audio/video
RCA jacks, or a personal audio/video player to the
audio/video jack below the television on the con-
sole. See page 12 for instructions.
Follow the steps below to operate the television.
Insert the key into the console.
See HOW TO TURN ON THE POWER on page
15.
Press the TV button to select a television
source or the Console mode.
When the key is inserted, the television will auto-
matically turn on. Select a television source or the
Console mode by pressing the TV button repeat-
edly.
If you have connected an antenna, a 75 ohm
CATV cable, or a VCR to the 75 ohm antenna ter-
minal on the treadmill, select the Tuner source. If
you have plugged a DVD player or VCR into the
three audio/video RCA jacks, select the Input 1
source. If you have plugged a personal
audio/video player into the audio/video jack below
the television on the console, select the MP3
source. If you do not wish to use the television,
select the Console mode.
Press the Channel buttons to select the
desired channel.
When the television is turned on, the screen will
show the last channel that was selected. To select
a different channel, press the Channel (Chan) but-
tons. The selected channel number will appear on
the screen for a few seconds. Note: The television
is equipped with a channel memorizing function
that allows you to go directly from the current
channel to the next channel saved in memory.
Before channels can be selected in this way, they
must be saved in the television’s memory. See
HOW TO USE THE INFORMATION MODE on
page 19.
Press the Volume buttons to adjust the volume.
W
hen either Volume (Vol) button is pressed, the
volume level indicator will appear on the screen
for a few seconds.
T
o use earphones or headphones (not included),
plug them into the headphone jack beside the key
o
n the console.
HOW TO USE THE STEREO SOUND SYSTEM
To play music or audio books through the console’s
stereo speakers, you must connect your MP3 player or
CD player to the console. Locate the audio/video jack
below the television on the console, and plug it into a
jack on your MP3 player, CD player, or personal video
player. Make sure that the audio/video cable is fully
plugged in.
Next, press the Play button on your MP3 player, CD
player, or personal video player. Then, adjust the vol-
ume on your MP3 player, CD player, or personal
audio/video player. You can also adjust the volume on
the console by pressing the Volume increase and de-
crease buttons.
If you are using a personal CD player or DVD player
and the CD or DVD skips, set the CD player or DVD
player on the floor or another flat surface instead of on
the console.
4
3
2
1